HOME > MACHINES > EXCAVATORS
930F
THE BEST MACHINES
ARE DESIGNED
FOR BALANCE,
NOT COMPROMISE...
Engine
Cummins B6.7
Net Power
161kW
Operating Weight
31,500 - 35,400kg
Bucket Capacity
1.6m3
NO MATTER WHAT YOU DO, YOU’VE GOT TO TRUST YOUR MACHINE 100%
TOUGHNESS & DURABILITY
DESIGNED TO WORK HARDER, FOR LONGER
To build machines that can withstand the hardest conditions takes intelligent design, and attention to detail. We know that a machine is only as strong as its weakest point, so every weld, every joint, every component is scrutinized to ensure it passes our rigorous durability tests. Here’s the proof.
Upper rollers adopt bilateral support to increase the support and reduce wear.
Deeper side beams provide higher impact resistance and make it quicker and easier to add additional impact plates if required.
100% flaw detection ensures every weld is checked to meet our stringent standards.
930F counterweight increased by 300kg to 5.8T
936F counterweight increased by 700kg to 7.7T
936F counterweight increased by 700kg to 7.7T
Finite element analysis proves the load efficiency and toughness of our boom and arm, but we go further to reduce stress by 25%.
POWER AND EFFICIENCY
DESIGNED TO MOVE MORE, FOR LESS...
There’s no need to compromise digging performance to get the highest fuel efficiency because the all New 30 - 42T range gives you both. With greater torque and more power at lower engine speeds you get the power you want and the fuel efficiency you need
With VGT technology, six-cylinder Cummins engines deliver 5% extra torque compared to high torque at low engine speeds. VGT enables the engine to maximize its power output whilst creating less noise and using less fuel.
Engine Auto Idle and Auto Shutdown make every single drop of fuel count. Reducing unproductive fuel saves you money and helps protect the environment.
When it comes to efficiency, the 30 - 42T range is smarter than you’d think. Feed Forward control technology matches the engine’s speed to the operator’s command and predicted load to deliver even greater fuel economy.
We are always improving our performance, with fuel consumption reduced by 10% and efficiency increased by 5% compared to the E Series, we have delivered on that promise.
20% Increased Slew Torque on 930F/933F and 23% Increase of 936F/939F/942F
Increased Travel Motor Power: 930F/933F - 6% Increase 942F - 9% Increase
942F offers increased lift performance with 20mm larger diameter boom cylinders
Increased Travel Motor Power: 930F/933F - 6% Increase 942F - 9% Increase
942F offers increased lift performance with 20mm larger diameter boom cylinders
WHY CHOOSE BETWEEN POWER AND EFFICIENCY WHEN YOU CAN HAVE BOTH?
The all New 30 - 42T range let’s you do more, for less cost, and with less environmental impact, don’t settle for anything less.
TOUGH MACHINES CAN BE INTELLIGENT TOO
INTELLIGENCE AND CONTROL
DESIGNED TO WORK SMARTER
Smart operators choose smart machines because they know their job is tough enough. When it comes to intelligence and control the all New 30 - 42T range may surprise you as it’s packed with smart features to make life easier.
With a choice of 3 Integrated Work Modes each designed to match the engine speed, pump flow and system pressure to your chosen application, it’s easy to find the perfect balance of performance and economy.
The state-of-the-art full electro-hydraulic system from Kawasaki provides lightening fast signals between the joysticks, pumps and valve blocks to deliver pin point precision and maximize available engine power.
With a suite of Smart functions at your fingertips you can control your attachment properties from the comfort of your cab. It’s easy:
Adjustable flow control
Adjustable pressure control
10 attachment settings
Adjustable flow control
Adjustable pressure control
10 attachment settings
936F/939F/942F features a larger pump with 11% increased flow
Improves performance and prolongs tool life by preventing excessive pressure during braking applications.
Perfect for smooth levelling and deep excavation work, this smart function reduces fuel consumption by allowing the boom to fall under its own mass.
Perfect for smooth levelling and deep excavation work, this smart function reduces fuel consumption by allowing the boom to fall under its own mass.
COMFORT AND ERGONOMICS
DESIGNED AROUND THE OPERATOR
Climb into the spacious cab and you’ll know that it has been designed by a team that really knows what its like to be an operator. Talking, listening and observing operators, our design team spend almost as much time in the cab as they do with the CAD. The result? One of the most ergonomic and comfortable cabs you can get.
From the ergonomically positioned non-slip pedals to the multi-functional joysticks, the cab interior represents a masterclass in design.
Every action and movement requires the minimum of effort from the operator.
Boom float, travel speed and proportional auxiliary controls are customizable and finger tip controlled - you can even mute your music!
Every action and movement requires the minimum of effort from the operator.
Boom float, travel speed and proportional auxiliary controls are customizable and finger tip controlled - you can even mute your music!
Every operator is different, so we offer a range of seats and joystick configurations to suit everyone.
Mechanical suspension standard seat Comfort level, air suspension seat with adjustable lumbar support.
Luxury level, heated air suspension seat with adjustable lumbar and premium padding.
Mechanical suspension standard seat Comfort level, air suspension seat with adjustable lumbar support.
Luxury level, heated air suspension seat with adjustable lumbar and premium padding.
We’ve designed the operator interface to be even more intuitive and easy to use. The large 8-inch LCD colour screen can be controlled via touchscreen or by a fingertip navigational control dial conveniently sited in the armrest control panel.
We never forget that a machine is not just a tool, it’s your place for many hours a day (and night). So, we’ve remembered all the little things that make it feel like home.
Cool box for food & drinks
Large storage box and rack
Drinks holder
Phone holder with 12V charging, USB and
AUX ports
Cool box for food & drinks
Large storage box and rack
Drinks holder
Phone holder with 12V charging, USB and
AUX ports
Our latest F Series cabin and sound insulation system dramatically reduces the noise in cab by as much as 3dB on the 930F/933F and 6dB on the 936F/939F/942F.
WE CONSTANTLY ASK... HOW CAN WE MAKE OUR MACHINES EVEN SAFER
SAFETY AND VISIBILITY
SAFER ALL-ROUND ACCESS
Being protected in the cab is important, but accident research shows us that most accidents occur outside of the machine. We’ve taken the challenge to make our machines even safer to be around.
The driver protection system delivers even greater protection to the front and top of the cab and protects the operator from falling rocks and debris. The front screen has a hinge design making cleaning and maintenance easier.
The new 0.5m wide stepped boarding channel with non-slip treadplates makes
getting on and off the machine safer.
The engine compartment features a gripped access platform.
Optional guard rails or integral fences on the left and right sides of the upper platform increase safety.
getting on and off the machine safer.
The engine compartment features a gripped access platform.
Optional guard rails or integral fences on the left and right sides of the upper platform increase safety.
Our cab design provides the operator with the very best view of the site, from every angle. Smart design ideas such as integrating the steps into the line of the cabin, improve visibility on the right hand side giving a 180 degree view.
With 360 degree camera as standard in Europe, you can get an uninterrupted panoramic view around the machine at all angles from the large LCD screen.
The ground level emergency stop switch is fitted as standard.
No need to climb on the machine, all the daily maintenance points, including the oil level check point are easily accessible from the ground.
LED work light for better night visibility is fitted as standard.
MAINTENANCE AND UPTIME
EASY TO OWN AND EASY TO MAINTAIN
We understand that when your machine’s not working, it’s not earning. To maximize your productive hours, we’ve made the All New 30-42T even easier to maintain, helping you make every productive second count.
Maintenance should be simple so to save you time, all engine oil filter replacement cycles have been synchronize.
We’ve increased the storage space behind the cab and added a segregating tray to create a useful space for your maintenance kit such as grease guns and lifting equipment.
Convenience and safety should never be compromised.
The easy to access optional re-fuelling pump is safely stowed behind the bay door.
All filters are located close to the bay doors for safe access and speedy maintenance.
To aid access to the upper structure, a second access ladder behind the cabin offers additional convenience to the operator.
The easy to access optional re-fuelling pump is safely stowed behind the bay door.
All filters are located close to the bay doors for safe access and speedy maintenance.
To aid access to the upper structure, a second access ladder behind the cabin offers additional convenience to the operator.
By grouping the greasing points together on the boom base, top of the dipper and slew bearing we make daily maintenance faster and easier. Optional automatic lubrication pipeline gives you easy access to all the lubrication points in one place, saving you even more time on daily maintenance.
New long life hydraulic oil reduces total cost of ownership and saves service maintenance time.
Specification
Download a brochure930F - STAGE V
Maximum operating weight
31,600 kg
Minimum operating weight
-
Engine power
173 kW (235 hp)
Bucket capacity
1.4 m³ (1.8 yd³ )
Maximum travel speed (High)
5.5 km/h (3.4 mph)
Maximum travel speed (Low)
3.0 km/h (1.9 mph)
Maximum swing speed
10.3 rpm
Arm breakout force
-
Arm breakout force Power boost
-
Bucket breakout force
-
Bucket breakout force Power boost
-
Shipping length
10,653 mm (34'11'') / 10,250 mm (33'7'')
Shipping width
-
Shipping height
3,525 mm (11'7'')
Track shoe width (std)
600 mm (24")
Boom
6,400 mm (21')
Arm
3,050 mm (10'0'') / 2,600 mm (8'6'')
Digging reach
10,653 mm (34'11")
Digging reach on ground
10,453 mm (34'4")
Digging depth
7,300 mm (23'11"
Vertical wall digging depth
6,216 mm (20'5")
Cutting height
10,300 mm (33'10")
Dumping height
7,086 mm (23'3")
Minimum front swing radius
4,040 mm (13'3")
Model
Cummins B6.7
Emission
Stage V
System maximum flow
2 × 266 L/min
(2 × 70.3 gal/min)
(2 × 70.3 gal/min)
System pressure
-
